Yamaha RX-V2400RDS, Руководство пользователя

Страница: 31 / 91

29
English
BASIC SETUP
PRE
P
ARA
T
ION
7
Press
n
to select SPEAKERS, then press –/+
to select the number of speakers connected
to the unit.
The choices vary as follows depending on the
PRESENCE setting:
8
After you have finished the settings, press
n
,
then press –/+ to select:
SET
To apply the changes.
CANCEL
To cancel the setup.
If you select SET, you will hear a test tone from each
speaker.
9
Press
n
to select CHECK OK?, then press –/+
to select:
YES
To exit the setup if the test tones were
satisfactory.
NO
To adjust each speaker level (see page 52).
Choices
PRESENCE setting
YES NONE
2
— —
Front L/R
3
— —
Front L/R,
Center
4
Presence L/R,
Front L/R Front L/R,
Surround L/R
5
Presence L/R,
Front L/R,
Center Front L/R,
Center,
Surround L/R
6
Presence L/R,
Front L/R,
Surround L/R Front L/R,
Center,
Surround L/R,
Surround back
7
Presence L/R,
Front L/R,
Center,
Surround L/R Front L/R,
Center,
Surround L/R,
Surround back
L/R
8
Presence L/R,
Front L/R,
Center,
Surround L/R,
Surround back
— —
9
Presence L/R,
Front L/R,
Center,
Surround L/R,
Surround back
L/R
— —
L L C R
SL SB SR
L L C R
SL SB SR
L L R
L L C R
SL SB SR
L L R C
L L C R
SL SB SB SR
L L R
SL SR
L L C R
SL SB SR
L L C R
SL SR
L L C R
SL SB SR
L L C R
SL SB SR
L L C R
SL SB SR
. [
SET CANCEL
ROOM SIZE=SMALL
1 BASIC MENU 2/2
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
.
CHECK OK?
;;;;
YES
1 BASIC MENU 2/2
- +
.
FR
C
SL
B)SPEAKER LEVEL
(when NO is selected)
01EN00_RX-V2400RDS_EN.book Page 29 Thursday, November 6, 2003 11:49 AM