46
En
You can use two tuning modes to tune into the desired
FM/AM station:
Frequency tuning mode
You can search or specify the frequency of the desired
FM/AM station automatically or manually (see “FM/AM
tuning operations” on this page).
Preset tuning mode
You can preset the desired FM/AM station in advance, and
then recall the station by specifying the preset group and
number (see “Recalling a preset station” on page 48).
Orient the connected FM and AM antennas for the best
reception.
1
Press
K
BAND
(or
7
BAND
) to select the
desired reception band.
2
If the PRESET indicator in the front panel
lights up, press
I
SEARCH MODE
(or
H
SRCH MODE
) to turn it off.
3
To search the station automatically, press
and hold
G
PRESET/TUNING/CH
l
/
h
(or
press
8
PRESET/CH
k
/
n
) for about 2
seconds. To search the station manually,
press
G
PRESET/TUNING/CH
l
/
h
repeatedly.
• To tune into a higher frequency, press
G
h
(or
8
k
).
• To tune into a lower frequency, press
G
l
(or
8
n
).
If the signal from the station you want to select is weak,
search the station manually or enter the frequency directly
(page 46).
y
• When this unit is tuned into a station, the TUNED
indicator lights up.
• To switch the information (current input source, current
sound field program, etc) displayed in the front panel
display, press
L
INFO
(or set the operation mode to
E
AMP
and then press
B
INFO
) repeatedly.
• To switch between stereo or monaural FM reception, press
J
STEREO/MONO
(or
N
AUDIO
).
■
Direct frequency tuning
Use this feature tune into the desired station directly by
entering the frequency.
1
Follow steps 1 and 2 in “FM/AM tuning
operations” (page 46) to select the desired
reception band.
2
Enter the frequency of the desired station by
pressing the numeric buttons (
A
).
Example: To tune into 103.70 MHz
y
If the entered frequency is out of the range of the FM/AM
tuning, “WRONG STATION!” appears in the front panel
display.
FM/AM tuning
Overview
Note
Before performing the following operations, set the operation
mode selector on the remote control to
E
SOURCE
and then
press
3
TUNER
.
FM/AM tuning operations
F M 8 8 . 9 0 M H z
PRESET turns off
Note
1
0
3
7
