96
En
CUSTOMIZING THIS UNIT (MANUAL SETUP)
■
Volume Trim
C)VOLUME TRIM
Use this feature to adjust the level of the signal input at
each jack. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.
Choices: XM, TUNER, PHONO, CD, CD-R, MD/TAPE,
DVD, DTV, CBL/SAT, VCR 1, DVR/VCR 2,
V-AUX, DOCK, MULTI CH
Control range: –6.0 to +6.0 dB
Control step: 0.5 dB
Initial setting: 0.0 dB
y
This parameter also affects the signals output at ZONE OUT
jacks.
■
Decoder mode
D)DECODER MODE
Use to switch the input mode. You can designate the
reassigned digital input jacks for specific audio signals
(DTS, etc.).
Choices:
AUTO
, DTS
• Select “AUTO” if you want this unit to automatically
detect input signal types and select the appropriate
input mode.
• Select “DTS” if you want this unit to select DTS as the
input mode.
■
Multi channel input Setup
E)MULTI CH SET
Use to set the direction of the signals input into the center,
subwoofer and surround channels when a source
component is connected to the MULTI CH INPUT jacks.
If you input 8-channel signals from an external decoder,
use this feature to select jacks for the additional front
signals.
BGV
BGV
Use this feature to select the video source played in the
background of the sources input from the MULTI CH
INPUT jacks.
Choices: DVD, DTV, CBL/SAT, VCR, DVR/VCR 2,
V-AUX,
LAST
, OFF
• Select “LAST” to set this unit to automatically select
the last selected video source as the background video
source.
• Select “OFF” to set this unit not to play the video
source in the background.
Input channels
INPUT CH
Use this setting to select the number of channels input
from an external decoder.
Choices:
6CH
, 8CH
• Select “6CH” if you input 6-channel signals.
• Select “8CH” if you input 8-channel signals.
If “ZONE2 AMP” is set to “[SP1]”, “[SP2]” or “BOTH” (see
page 100), no sound is output from the surround back speakers
even if you select “8CH”. In this case, select “6CH” and set the
output setting of the external component to 6 channels.
Front input
FRONT
If you selected 8ch in “INPUT CH”, you can select the
analog jacks at which the front signals from an external
decoder will be input.
Choices: MD/TAPE, CD-R, CD,
DVD
, DTV, CBL/SAT,
VCR1, DVR/VCR2, V-AUX
“FRONT” parameter appears only when you set “INPUT CH” to
“8CH”.
XM
;;;
0.0dB
TUNER
;;;
0.0dB
PHONO
;;;
0.0dB
CD
;;;
0.0dB
[]/[]:Up/Down
[]/[]:Adjust
C)VOLUME TRIM
p
p
p
[
D)DECODER MODE
[]/[]:Up/Down
[]/[]:Adjust
p
p
.
CD
;;;;
AUTO
DVD
;;;;
AUTO
DTV
;;;;
AUTO
CBL/SAT
;;;;
AUTO
p
[
Note
Note
.
BGV
;;;;;;;;;
LAST
INPUTCH
;;;;;
6CH
E)MULTI CH SET
[]/[]:Up/Down
[]/[]:Adjust
p
p
p
[
BGV
;;;;;;;;;
LAST
INPUTCH
;;;;;
8CH
.
FRONT
;;;;;;;;
DVD
E)MULTI CH SET
[]/[]:Up/Down
[]/[]:Adjust
p
p
p
[
01EN_00_RX-V1700_U.book Page 96 Tuesday, June 27, 2006 9:37 AM