Yamaha RX-V1200 RDS, Руководство по обслуживанию

Страница: 30 / 106

RX-V1200/RX-V1200RDS/HTR-5490/RX-V2200
RX-V1200/RX-V1200RDS/
HTR-5490/RX-V2200
29
Sub-menu CENTER SP REAR SP MAIN SP MAIN LEVEL LFE/BASS
1 MAIN: SMALL 0dB LARGE LARGE SMALL 0dB SWFR
2 MAIN: LARGE -10dB LARGE LARGE LARGE -10dB BOTH
3 CENTER: NONE NONE LARGE LARGE 0dB BOTH
4 LFE/BASS: MAIN SMALL SMALL LARGE 0dB MAIN
5 FRONT MIX: 5CH LARGE LARGE LARGE 0dB BOTH
6 REAR CENTER: MUTE LARGE LARGE LARGE 0dB BOTH
7 REAR L/R: MUTE LARGE LARGE LARGE 0dB BOTH
8. SPEAKERS SET
The input signal is automatically identified in the order of dts
→
DOLBY DIGITAL
→
AAC
→
PCM
→
Analog.
There are seven sub-menu items as follows. The signals output from the DSP block are the same as 1. YSS938: YSS
0dB.
LARGE: This mode is used with a speaker with high bass reproduction performance (a large unit). Full bandwidth
signals are output.
SMALL: This mode is used with a speaker with low bass reproduction performance (a small unit). The signals of 90Hz
or less are mixed into the channel specified by LFE/BASS.
NONE: This mode is used with no center speaker. The center content is reduced by 3dB and distributed to MAIN L/R.
The analog switch settings for each sub-menu are as shown in the table below.
MAIN: SMALL 0dB MAIN: LARGE -10dB CENTER: NONE
LFE: BASS:MAIN Front Mix: 5ch REAR CENTER: MUTE
REAR L/R: MUTE
Reference data (PRE OUT)
INPUT: DVD ANALOG (Both ch)
VOLUME: -10 dB
Sub-menu Condition MAIN L/R CENTER REAR C SWFR RL/RR
1 MAIN: SMALL 0dB 1kHz/90Hz, -20 dBV -5.5/-8.5 dBV -5.5 dBV -5.5 dBV -2.5 dBV -5.5 dBV
2 MAIN: LARGE -10dB 1kHz, -20 dBV -15.5 dBV -5.5 dBV -5.5 dBV -2.5 dBV -5.5 dBV
3 CENTER: NONE 1kHz, -20 dBV -9.0 dBV -
∞
-5.5 dBV -2.5 dBV -5.5 dBV
4 LFE/BASS: MAIN 50Hz, -20 dBV -4.0 dBV -8.5 dBV (90Hz) -5.5 dBV -
∞
-8.5 dBV (90Hz)
5 FRONT MIX: 5CH 1kHz, -20 dBV -11.5 dBV -5.5 dBV -5.5 dBV -2.5 dBV -5.5 dBV
6 REAR CENTER: MUTE 1kHz, -20 dBV -5.5 dBV -5.5 dBV -
∞
-2.5 dBV -5.5 dBV
7 REAR L/R: MUTE 1kHz, -20 dBV -5.5 dBV -5.5 dBV -5.5 dBV -2.5 dBV -
∞