7
English
INTRODUCTION
PREP
ARA
TION
BASIC
OPERAIONT
AD
V
ANCED
OPERA
TION
ADDITIONAL
INFORMA
TION
APPENDIX
CONTROLS AND FUNCTIONS
1
Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
2
TRANSMIT indicator
Flashes while the remote control is sending signals.
3
STANDBY
Sets this unit in the standby mode.
4
SYSTEM POWER
Turns on the power of this unit.
5
Input selector buttons
Select the input source.
6
Display window
Shows the selected source component that you are
controlling.
7
SOURCE SELECT
k
/
n
Selects the source component without switching the
input.
8
10KEY/DSP
Selects the numeric button (10KEY) mode or DSP mode.
9
DSP program group/Numeric buttons
Select DSP programs or numbers according to the
position of 10KEY/DSP. (Press a button repeatedly to
select a DSP program within that group.)
0
6.1/ES
Turns on or off the Dolby Digital Matrix 6.1 or DTS ES
decoder with 10KEY/DSP set to the DSP position.
q
A/B/C/D/E
Selects one of the 5 preset station groups.
w
/–
Selects a preset station number (1 to 8).
e
RE-NAME
Used for changing the input source name in the display
window (see page 62).
r
CLEAR
Used for clearing functions acquired when using the learn
and rename features, programmed macros, and set
manufacturer codes (see pages 62 and 63).
t
LEARN
Used for setting up the manufacturer code or for
programming the functions of other remote controls (see
pages 57 to 59).
y
MACRO
Used to program a series of operations for control by a
single button (see page 61).
u
MACRO ON/OFF
Turns the macro function on and off.
i
6CH INPUT
Selects the source connected to the 6CH INPUT jacks.
o
MUTE
Mutes the sound. Press again to restore the audio output
to the previous volume level.
p
/–
Increases or decreases the volume level.
a
EFFECT
Switches the effect speakers (center, rear and rear center
(see page 17)) on and off. If the output of these speakers
is turned off, all Dolby Digital and DTS audio signals
except for the LFE channel are directed to the left and
right main channels.
s
Cover
Slides down to show the setup buttons.
d
LEVEL
Selects the effect speaker channels (center, rear, rear
center (see page 17) and subwoofer) so you can adjust
their output level independently.
f
ON SCREEN
Selects the on-screen display (OSD) mode for your video
monitor.
g
SLEEP
Sets the sleep timer.
h
TEST
Outputs the test tone.
j
PARAMETER/SET MENU
Selects the PARAMETER mode or SET MENU mode.
k
Cursor buttons
k
/
n
/–/+
Select and adjust DSP program parameters and SET
MENU items according to the position of PARAMETER/
SET MENU.
l
RESET
Press this button after you have changed the batteries or
when the remote control stops working properly.
(Pressing RESET does not clear the acquired functions.)
0102V1000RDS_1-10_EN
9/5/0, 4:41 PM
7