101
SETUP
Extended functionality that can be configured as needed (Advanced Setup menu)
Changing TV format
Change the color encoding format of OSD to PAL or NTSC
(default), to match the format used by the TV connected via the
HDMI OUT or VIDEO (MONITOR OUT) jack.
Removing HDMI video output up-scaling
limits
Removes the up-scaling limitation on video resolution when this
unit and a TV are connected via HDMI jacks.
If a resolution supported by the monitor cannot be detected when
configuring the up-scaling settings, this setting will remove the
output limitation.
Initializing various settings for this unit
Initializes various settings stored in this unit and sets it back to
default.
Select the items to be initialized from the following.
YES
(Default)
Video output signals of a resolution not supported by
the TV will not be transmitted.
SKIP
This unit ignores the TV’s support capability and
transmits input video signals to the TV.
TVFORMAT-NTSC
MON.CHK-YES
DSP PARAM
Initializes all parameters for the sound programs.
VIDEO
Resets video conversion settings (resolution/aspect
ratio) in the Setup menu.
ALL
Resets this unit to default factory settings.
CANCEL
(Default)
Does not initialize.
When an option other than CANCEL is selected, the applicable
default settings will be restored when the unit switches to
standby mode.
INIT- CANCEL
Содержание RX-A700
