Yamaha RX-A2010 Скачать руководство пользователя страница 145

Страница: 145 / 170

145

Error indications for SIRIUS Satellite Radio™

Error indications for iTunes Tagging

Message

(alphabetical order)

Cause

Remedy

ACQUIRING SIG

The signal is too weak.

Adjust the orientation of the antenna of the SiriusConnect tuner by checking the antenna reception level
displayed in the front display (p.67) or TV (p.67).

ANTENNA ERROR

The antenna is not connected to the SiriusConnect tuner properly.

Check the connection of the antenna and SiriusConnect tuner (p.64).

CALL SIRIUS

The selected channel is not currently subscribed.

To subscribe the selected channel, contact SIRIUS Satellite Radio.
URL: https://activate.siriusradio.com/
Phone: 1-888-539-SIRIUS (1-888-539-7474)

CHECK SR TUNER

The SiriusConnect tuner is not connected to this unit or AC wall
outlet properly.

Check the connection of the SiriusConnect tuner and this unit or AC wall outlet (p.64).
SiriusConnect tuner to the AC wall outlet.

INVALID CH

The selected channel is currently out of service.

Try another channel.

NOT SUPPORTED

This unit does not support the connected SIRIUS Satellite Radio
tuner.

Use the SiriusConnect tuner supported by this unit.

Message

(alphabetical order)

Cause

Remedy

Insufficient Data

Tagging is not available because the selected HD Radio program
(or song being played) does not support iTunes Tagging.

There is no problem.

iPod full Tags cannot
be stored

Tag data cannot be stored on the iPod because the storage area is
full.

Delete unnecessary data from your iPod with iTunes and try again.

Tag Already Stored

Tag data for the same content has been already stored.

There is no problem.

Tag Storage full

Tag data cannot be stored on this unit because the internal memory
is full.

Connect your iPod to this unit via an iPod dock to transfer the tag data to the iPod.

Transferring Failed

Tag data cannot be transferred to the iPod.

Check if the iPod is connected to the iPod dock (YDS-12 or YDS-11) properly.

Содержание RX-A2010











































































































































































Результаты поиска

Содержание RX-A2010

Отзывы:

Похожие инструкции для RX-A2010

Бренды по названию

Популярные бренды

Yamaha RX-A2010, Руководство пользователя

Результаты поиска

Содержание RX-A2010

Отзывы:

Похожие инструкции для RX-A2010

Бренды по названию

Популярные бренды