Yamaha RX-A2000, Руководство пользователя

Страница: 131 / 195

SETUP
Controlling the remote control to operate various functions
En
131
■
Registering remote control codes
for external component operations
The following section describes how to register remote
control code using an example of the registration of the
remote control codes of a Yamaha BD player connected
to AV2 jack.
1
Use “ Remote Control Code Search ” in the CD-
ROM to search the available remote control
codes from the category or manufacturer of
external components.
“2064” can be used for a Yamaha BD player.
2
Press
B
SETUP .
“SETUP” appears in the display window on the remote
control.
3
Press
i
Cursor
B
/
C
repeatedly to select
“PRESET” and press
i
ENTER .
J
2
The remote control enters the preset mode. “PRESET”
and name of the currently selected control area appears
in the display window alternately.
4
Press
d
AV2 to switch the input source to
AV2.
J
1
Perform the following steps to register the selected
input source here to the remote control code.
5
Press
i
ENTER .
The current code setting appears.
6
Enter a remote control code “2064” using
v
Numeric keys .
A remote control code can be entered using
i
Cursor
B
/
C
/
D
/
E
.
3 2 1
6
9 8 7
ENT 0
SETUP
4 5
TV
TV VOL TV CH
MUTE
INPUT
2
ENTER
TUN./CH
CATEGORY
SOURCE RECEIVER
AV
AUDIO
4 3 1
7 5 6
V-AUX
4 3 1 2
USB MULTI NET PHONO
TUNER DOCK SIRIUS [ A ]
i
v
k
B
d
•
Perform each of the following steps within 30 seconds.
Settings will be automatically stopped if more than 30
seconds passes since the last operation. To reset, repeat
from step 2.
•
Remote control code of an external component cannot
be set from the name or model number of a unit. Use
“ Remote Control Code Search ” in the CD-ROM to
search the available remote control codes from the
category or manufacturer of external components.
•
If multiple remote control codes exist, first set the first
code in the list, if it does not work then try the other
codes.
SETUP
PRESET
AV2
5098
2 0 6 4
Continues to the
next page
J
1 :
To control a TV independently from the input source using the
k
TV control keys
, press
k
A
in step 4 and enter the remote
control code for the TV. The
k
TV control keys
can be used to
control the TV regardless of the selected input source.
J
2 :
v
ENT
can also be used for remote control settings as well as
i
ENTER
.