Yamaha RX-7 страница 49 Скачать руководство пользователя

Страница: 49 / 60

JOBS #21 - #25: VERIFY DATA

FUNCTION

Verifies whether data has been saved correctly

to a cartridge or cassette.

Refer to the CASSETTE/CARTRIDGE Menu on the RX7

front panel and the TABLE OF CASSETTE/CARTRIDGE
JOBS above to determine the appropriate Job number for

the type of data to be verified.

The operations for verifying single Patterns saved to a car-
tridge or cassette (Job #13) are slightly different and therefore
explained separately below.

The Verify operations are exactly complementary to the Save

operations explained above.

GENERAL VERIFY OPERATION

1 . Select the desired Job #21, #22, #24 or #25.

The display will ask you to confirm your choice of data
type.

2. Press +1/YES if you want to verify the displayed data.

The LCD will ask for confirmation:

3. Press +1/YES again to confirm.

The display will show

then

indicating that the data has been verified.

VERIFYING SINGLE PATTERNS SAVED

TO A CARTRIDGE

Select Job #23 in Cartridge Mode.
The display will ask you to confirm:

2. Press +1/YES. The display will change to

3. You can now specify the Pattern number and cartridge

location you want to verify. (Use ACCENT 2 to switch
between them.)

4. Press +1/YES.

The LCD will ask you to confirm.

5. Press +1/YES again.

If the data has been saved properly, the display will show

* If data has not been saved correctly, an error message

will appear instead. Refer to the section ERROR MES-
SAGES.

VERIFYING SINGLE PATTERNS SAVED
TO A CASSETTE

Select Job #23 in Cassette Mode.
The display will ask you to input the PTN number.

2. Enter the Pattern number directly with the numeric keys,

then press +1/YES. The display will ask you to confirm:

Press +1/YES again. The display will show

After verification, the display will show the following
message if the data has been saved properly:

Содержание RX-7





























































Результаты поиска

Содержание RX-7

Отзывы:

Похожие инструкции для RX-7

Бренды по названию

Популярные бренды

Yamaha RX-7, Уполномоченное руководство по продукции

Результаты поиска

Содержание RX-7

Отзывы:

Похожие инструкции для RX-7

Бренды по названию

Популярные бренды