![background image](http://html2.mh-extra.com/html/yamaha/rs7000-ver-1-2/rs7000-ver-1-2_addendum_3256361002.webp)
2
RS7000
●
Set grid resolution.
It is now possible to specify the grid resolution.
4
RESOLUTION .......................................................... [DIAL 4]
[Settings] Range: 15 (128
th
-notes), 20 (64
th
-note triplets), 30 (64
th
notes), 40 (32
nd
-note triplets), 60 (32
nd
notes),
80 (16
th
-note triplets), 120 (16
th
notes), 160 (8
th
-note triplets).
When the number of grid units per measure is greater than 16 the keyboard pad edit location with the measure is set via the [OCT DOWN]
and [OCT UP] buttons. The keyboard pad LEDS indicate the current edit location while the [OCT DOWN] or [OCT UP] button is held.
When a triplet resolution is selected only keyboard pads 1 ~ 12 are used.
In this example the fourth of a possible eight locations is selected for editing.
●
Measure Hold
The Measure Hold can now be selected from the Grid Step record standby mode (Owner’s Manual page 78).
7
MEASURE HOLD .................................................... [DIAL 3]
Can be set when the Grid Step record type is selected.
[Settings] Range: ON, OFF
1-measure monitoring is selected when ON, full-pattern monitoring when OFF.
■
Changes to the Voice Edit Filter Page
(Owner’s Manual page 102)
12 new Voice Edit filter types are provided in addition to a new “Distance” parameter.
1
CUTOFF FREQUENCY (CUTOFF)
(Refer to Owner’s Manual page 103)
2
DISTANCE (DST) ..................................................... [F1]
→
[DIAL 1]
Relative
[Settings] Range: –32 ~ +31
Specifies the distance between the two frequencies for the dual-type filters (Dual LPF, Dual HPF, Dual BPF, Dual BEF) and LPF+BPF com-
bined filter. When set to “0” the two cutoff frequencies are equal.
TRACK
1
2
3
4
5
6
7
8
9
CAPS
SOLO
K !
L #
M $
N %
O &
P '
Q (
R )
S -
MUTE
KEY-
BOARD
ARPEGGIO
ON
RANSPOSE
ALL
TR-
TR+
1~8
9~16
TRANSPOSE(-)
TRANSP
STORE
MUTE
SCENE
1
2
3
SECTION
A
B
C
D
E
OCT
DOWN
OCT
UP
MEMORY
N K