RP-U200
RP-U200
13
0. EXIT
(DIAG end)
Terminates the DIAG function, executes CPU resetting
and restart operation.
Use the input selector PC for restarting operation.
Executing the memory reset reservation setting will set to
the standby mode.
Apply an 1kHz, 150mV signal to ANALOG input terminal.
1. All 5.1
Speaker output from all 5.1 channels (L, R contents only)
2. Main 2ch
Speaker output from main 2 channels
3. Rear 2ch
Speaker output from rear 2 channels
4. Center 1
Speaker output from center 1 channel
5. Sub 1ch
Speaker output from sub-woofer output 1 channel
6. Normal 6
Speaker output from all 5.1 channels (All contents straightly)
7. Tmute ON
Tuner mute ON
8. Tmut OFF
Tuner mute OFF
9. Smute ON
S-MUTE ON
10. SmutOFF
S-MUTE OFF
11. LargeSP
Speaker size setting
➝
Large
12. SmallSP
Speaker size setting
➝
Small
13. T-Exit
Tuner frequency setting for factory inspection & exit from
DIAG mode.
14. RETURN
Returns the menu to the main menu (11. U200).
11. U200
(RP-U200 control)