English
13
RM-WAP-16 RM-WAP-8 Owner’s Manual
5.
Slide this unit to engage the hooks.
This completes the installation. For safety, make sure that the unit does not come off the
mounting bracket, even when a force is applied to the unit.
NOTE
: To remove this unit from the mounting bracket, slide the unit in the opposite
direction of installation while moving the UNLOCK switch on the rear panel (top
edge in the illustration above) in the direction shown below.
NOTE
: This unit can also be placed on a flat surface. Install it on an open area such as a
desk or shelf. Do not install it inside a shelf or where airflow is blocked by
obstructions and do not place it on heat-sensitive objects.
UNLOCK switch
RM-WAP-16_RM-WAP-8_om_7multi_A0.book 13 ページ 2021年2月5日 金曜日 午後3時28分