manualshive.com logo in svg

Yamaha RHINO YXR45FW, Руководство пользователя

Поделиться
Скачать
Yamaha RHINO YXR45FW Скачать руководство пользователя страница 38

4-13

On-Command four-wheel-drive switch
“2WD”/“4WD” 

1. Select lever
2. On-Command four-wheel-drive switch “2WD”/“4WD”

To change from 2WD to 4WD, stop the vehi-
cle, and then set the switch to “4WD”. When
the vehicle is in 4WD, the four-wheel-drive in-
dicator light “ ” or, for special edition models,
the four-wheel-drive indicator “

” on

 

the

multi-function meter unit display will come on.
To change from 4WD to 2WD, stop the vehi-
cle, be sure the lever is set to position 

a

, and

then set the switch to “2WD”.

WARNING

POTENTIAL HAZARD 
Changing from 2WD to 4WD or from
4WD to 4WD-LOCK (“DIFF.LOCK”), or
vice-versa while the vehicle is moving. 
WHAT CAN HAPPEN 
The vehicle handles differently in 2WD
than in 4WD and in 4WD-LOCK in some
circumstances. Changing from 2WD to
4WD or from 4WD to 4WD-LOCK, or
vice-versa while moving may cause the
vehicle to unexpectedly handle differ-
ently. This could distract the operator
and increase the risk of losing control
and an accident. 
HOW TO AVOID THE HAZARD 
Always stop the vehicle before chang-
ing from 2WD to 4WD or from 4WD to
4WD-LOCK, or vice-versa.

EE.book  Page 13  Wednesday, August 2, 2006  5:10 PM

Содержание RHINO YXR45FW







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды