background image

7-6

Protective structure

The vehicle cage/frame provides a protective
structure that helps limit intrusions by branch-
es or other objects and may reduce your risk
of injury in accidents. The protective structure
will not protect occupants in all rollovers or ac-
cidents.

Body parts outside of vehicle can be struck by
passing objects or crushed during vehicle roll-
over. Do not put your hands or feet outside of
the vehicle for any reason. Do not hold onto
the door, cage/frame or hip restraint. Wear
your seat belt and helmet.

If you think or feel that the vehicle may tip or
roll, do not put your hands or feet outside the
vehicle for any reason. You will not be able to
stop the vehicle from tipping over using your
body. Any part of your body (arms, legs, or
head) outside of the vehicle can be crushed
by the vehicle cage/frame.

Seat belts

Seat belts should be worn by both driver and
passenger. Driver must be sure that the pas-
senger is belted before driving.

Be sure the seat belt is not twisted, is
close-fitting across the hips and chest,
and is latched securely.

Do not wear the lap belt across the abdo-
men or stomach.

Do not put the shoulder belt behind the
back.

Failure to use seat belts properly may lead to
an increased likelihood and severity of injury.

1RB71_EE.book  Page 6  Friday, April 20, 2012  8:38 AM

Содержание Rhino 700 Fi































































































































































































Отзывы: