Yamaha RCX222, Руководство пользователя

Страница: 83 / 524

3-18 3-19
Chapter
3
INST
ALLA
TION
9. Connecting the absolute battery
The absolute batteries shipped with the controller are unused, and the battery connectors
are left disconnected to prevent discharge.
After installing the controller, always be sure to connect the absolute batteries before
connecting the robot cable.
An absolute battery should be connected to the "BAT A" or "BAT B" connector on the
front of the controller. When two batteries are used and connected to the both "BAT A"
and "BAT B" connectors (standard), the data retention time (backup time) will be doubled
compared to that of one battery.
■
Battery connection
YM
RGEN
TEM
P
RPB
I/O
B/A
BAT
RCX222
BAT A connector
BAT B connector
XM
MOT
OR
SRV
ERR
RDY
E-ST
OP
OP.1
OP.2
Connector on controller Backup time Battery connection
Both "BAT A" and "BAT B" About 1 year Standard (2 batteries)
"BAT A" or "BAT B" About half a year (1 battery)
c
CAUTION
When connecting the absolute batteries in parallel, use the same batteries.
w
WARNING
DO NOT MODIFY THE WIRING OR ATTEMPT TO ExTEND IT. THIS COULD CAUSE
EqUIPMENT MALFUNCTIONS AND BREAKDOWNS.
9. Connecting the absolute battery