Item
Setting Value or Display
Description
Status
Not available
Displayed if YPAO measurements are not
reflected in speaker settings.
Available
Displayed if YPAO measurements are reflected in
speaker settings.
YPAO
On/Off
Selects whether to reflect YPAO measurements
in speaker settings.
Subwoofer
Use/Do not use
Sets whether to use/not use subwoofer.
Speakers
Full Band/Low Cut
Sets the frequency bandwidth output to the left/
right speakers. If you select low frequency cut,
the configured crossover frequency is applied.
If a subwoofer will not be used, the setting
cannot be made.
Crossover
40 Hz to 200 Hz
Sets the speaker and subwoofer crossover
frequencies.
If a subwoofer will not be used, the setting
cannot be made.
Distance
L
0.30 m to 24.00 m
(0.05 m steps)
Sets the distance from the listening position to
each speaker individually so the sound from
each of them reaches you at the same time.
R
SW
Level
L
-10.0 dB to +10.0 dB
(0.5 dB steps)
Sets speakers individually so the volume from
each sounds the same at the listening position.
R
SW
EQ
On/Off
Sets whether to use/not use an equalizer based
on YPAO measurements.
YPAO Volume
On/Off
When “YPAO Volume” is set to “On”, the balance
between the bass and treble ranges is adjusted
automatically in conjunction with the volume,
which allows you to enjoy a natural sound
quality balance, even at low volumes.
NOTE
If you will use a subwoofer, install it before running YPAO measurements to ensure a smooth connection between the bass and
midrange. If you feel the volume of the bass is too loud or low, adjust to the desired volume with “SW” of “Level” item.
Related links
“Registering with the MusicCast network” (p.43)
51
PREPARATION > Automatic adjustment of speaker settings (YPAO)
