●
Confirmation of firmware version
Before and after updating the firmware, check the firmware version by using the self-diagnostic function menu.
Start up the self-diagnostic function and select “S2. ROM VERSION/CHECKSUM” menu.
Using the sub-menu, have the firmware version displayed, and note them down.
(For details, refer to “SELF-DIAGNOSTIC FUNCTION”)
*
When the firmware version is different from written one after updating, perform the updating procedure again from
the beginning.
●
Initializing the back-up IC (EEPROM: IC22 on DIGITAL P.C.B.)
After updating the firmware, the back-up IC MUST be initialized by the following procedure store the setting information
(soundfield parameters, system memory and tuner presetting, etc.) properly.
Start up the self-diagnostic function and select “S1. FACTORY PRESET” menu.
(For details, refer to “SELF-DIAGNOSTIC FUNCTION”)
Select “PRESET RSRV”, press the “ ” (Power) key to turn off the power once and turn on the power again. Then the
back-up IC is initialized.
■
UPDATING FIRMWARE
When the following parts are replaced, the firmware must be updated to the latest version.
DIGITAL P.C.B.
●
Required
Tools
• USB storage device
• Firmware
R0346-xxxx.bin
●
Preparation
1. Download the latest firmware from the specified download source to the folder of the PC.
2. Copy the latest firmware from the PC to the root folder of the USB storage device.
Note: When the latest firmware is copied to a sub-folder of the USB storage device, the update will not proceed.
13
R-N500
R-N50
0
Содержание R-N500
