Periodic maintenance
66
Shifted to right
Shifted to left
5.
Adjust the drive track deflection to speci-
fication.
CAUTION:
ECS00591
The right and left adjusting nuts should be
turned an equal amount.
6.
Recheck alignment and deflection. If nec-
essary, repeat steps 3 to 5 until the prop-
er adjustment is achieved.
7.
Tighten the rear axle nut.
Slide runners
Check the slide runners for wear and dam-
age.
If the slide runners reach the wear limit, they
should be replaced.
CAUTION:
ECS00350
Ride on fresh snow frequently. Operating
on ice or hard-packed snow will rapidly
wear the slide runners.
1. Forward
2. Gap
3. Slide runner
4. Drive track
5. Slide metal
1. Forward
2. Gap
3. Slide runner
4. Drive track
5. Slide metal
Drive track
deflection
More than
specified
Less than
specified
Left adjusting
nut
Turn in
Turn out
Right adjust-
ing nut
Turn in
Turn out
Rear axle nut tightening torque:
75 Nm (7.5 m·kgf, 54 ft·lb)
1. Slide runner
2. Wear limit height
Slide runner wear limit height:
10.5 mm (0.41 in)
U8GK11E0.book Page 66 Wednesday, April 11, 2007 9:51 AM
Содержание PZ50GTX
