8-28
WARNING
@
Never adjust the control rods beyond the maximum
range indicated on the rods with red paint
3
.
@
c
Adjustable range
d
Standard position
ESU04342
Adjusting the 2-up adjusting block spring force
For PZ50VT
The spring force can be adjusted by changing the posi-
tion of the 2-up adjusting blocks.
NOTE:
@
Be sure to make this adjustment when there is no load
(rider or cargo) on the snowmobile.
@
1. Install the special tools
1
and
2
included in the
owner’s tool kit to the 2-up adjusting block
3
.
2. Pull the lock lever
4
and turn the special tool
2
to
change the block position.
3. Release the lock lever.
CAUTION:
@
Make sure that the 2-up adjusting blocks are
installed in the same position on both sides of the
snowmobile.
@
a
2-up position (rider and passenger)
b
Solo rider position
E_8gk.book Page 28 Friday, June 16, 2006 9:53 AM
Содержание PZ50FXW
