4
ENGLISH
4.
Attach the wall mounting unit firmly to
the surface of the wall.
• When attaching the wall mounting unit,
drill at least 2 deep holes in the wall for
the mounting screws to a balanced
mounting.
• When arranging power and signal cables on
the rear of the unit, use cable clips to prevent
damage to the cables.
1.
Remove the stand
(1) Remove the 4 screws from the rear of
the plasma monitor and then remove
the stand.
(2) Remove the 4 continuous thread
screws attaching the earth on the rear
cover.
2.
Attaching the plasma monitor mounting
bracket.
• Use 4 M6x18 screws to attach the
monitor mounting rack to the plasma
monitor.
Notch
Wall mounting unit
Ensure that you are
attaching the
mounting unit to a
strong support.
Use the washers
included as necessary.
Cable clip
Arranging cables
Attaching mounting fixtures to the plasma display monitor
Remove the 4 continous
thread screws
Remove the 4 screws
and the stand
Second hole from
the top of the
monitor mounting
bracket
Fifth hole from the
top of the monitor
mounting bracket
