Yamaha PW80(W) Скачать руководство пользователя

Страница: 62 / 72

PERIODIC MAINTENANCE AND MINOR REPAIR

6-28

EAU25971

Troubleshooting chart

WARNING

EWA10840

Keep away open flames and do not smoke while checking or working on the fuel system.

Check the fuel level in
the fuel tank.

1. Fuel

There is
enough fuel.

There is
no fuel.

Supply fuel.

Operate the kickstarter.

2. Compression

There is compression.

There is
no compression.

Check the ignition.

Have a Yamaha dealer
check the vehicle.

Remove the spark plug
and check the electrodes.

3. Ignition

Wet

Dry

Wipe off with a dry cloth and correct the
spark plug gap, or replace the spark plug.

Have a Yamaha dealer check the vehicle.

The engine does not start.
Have a Yamaha dealer check the vehicle.

Open the throttle halfway and operate
the kickstarter.

Check the compression.

The engine does not start.
Check the compression.

Содержание PW80(W)









































































Результаты поиска

Содержание PW80(W)

Отзывы:

Похожие инструкции для PW80(W)

Бренды по названию

Популярные бренды

Yamaha PW80(W), Руководство пользователя

Результаты поиска

Содержание PW80(W)

Отзывы:

Похожие инструкции для PW80(W)

Бренды по названию

Популярные бренды