PSR-SX600 Owner’s Manual
23
B
a
s
ic Op
er
at
io
n
s
With the convenient Direct Access function, you can instantly call up the desired display — with just a single
additional button press. Refer to the “Direct Access Chart” on page 105 for a list of the displays that can be called
up with the Direct Access function.
1
Press the [DIRECT ACCESS] button.
A message appears in the display prompting you to press the appropriate button.
2
Press the button (or move the knob, wheel or connected pedal)
corresponding to the desired setting display to instantly call up
that display.
For example, pressing the [METRONOME] button calls up the display in which
the time signature, volume and sound of the metronome can be set.
A message (information or confirmation dialog) sometimes appears on the screen to facilitate operation. When the
message appears, press the [+/YES] or [-/NO] button or one of the [1
] – [8
] buttons corresponding to the
message.
Calling Up the Desired Display Instantly — Direct Access
Messages Shown in the Display
