PSR-SX600 Owner’s Manual
101
Con
nect
ions – Us
ing
Y
our Ins
trume
nt wit
h Othe
r
D
e
vi
ces –
9
You can connect a stereo system to amplify the instrument’s sound by using the
OUTPUT [L/L+R]/[R] jacks.
You can use the instrument’s [MASTER VOLUME] dial to adjust the volume of the
sound output to the external device.
Connecting an External Stereo System (OUTPUT [L/L+R]/[R] jacks)
NOTE
Use audio cables and adaptor plugs
having no (zero) resistance.
NOTE
Use only the [L/L+R] jack for connec-
tion with a monaural device.
NOTICE
To avoid possible damage, first turn on the power to the instrument, and then to the external device.
When turning off the power, first turn off the power to the external device, and then to the instrument.
Since this instrument’s power may automatically be turned off due to the Auto Power Off function
(page 15), turn off the power to the external device, or disable Auto Power Off when you do not intend to
operate the instrument.
NOTICE
Do not route the output from the OUTPUT jacks to the [AUX IN] jack. If you make this connection, the sig-
nal input at the [AUX IN] jack is output from the [OUTPUT] jacks and then back again, creating a feedback
loop that could make normal performance impossible, and may even damage the equipment.
Phone plug
(standard)
Audio cable
Phone plug
(standard)
Input jack
Powered speaker
Audio signal