90
PSR-S910/S710 Reference Manual
Connections
– Using
Y
our Instr
ument with Other De
vices –
10
Assigning Specific Functions to Each Foot Pedal
The functions assigned by default to the connected footswitch or foot controller can be changed—for
example, letting you use the footswitch to start/stop Style playback, or use the foot controller to produce
pitch bends.
NOTE
For information on how to connect a foot pedal or what kinds of pedals can be connected, refer to the Owner’s Manual, chapter 10.
1
Call up the operation display.
[FUNCTION]
→
[D] CONTROLLER
→
TAB [
E
][
F
] FOOT PEDAL
2
Use the [A]/[B] buttons to select one of two foot pedals to which the function is to be
assigned.
3
Use the [1
▲▼
] buttons to select the function to be assigned to the pedal specified in
step 2.
For information on available parameters, see
.
NOTE
You can also assign the other functions to the pedal—punch in/out of Song (
). If you assign multiple func-
tions to the pedal, the priority is: Punch in/out of Song
→
Registration Sequence
→
Functions assigned here.
4
Use the [2
▲▼
]–[8
▲▼
] buttons to set the details of the selected functions (the part
for which the function is applied, etc.).
The available parameters differ depending on the function selected in step 3.
5
If necessary, set the polarity of the pedal by using the [I] button.
Pedal on/off operation may differ depending on the particular pedal you’ve connected to the instrument.
For example, pressing down on one pedal may turn the selected function on, while pressing a different
make/brand of pedal may turn the function off. If necessary, use this setting to reverse the operation.
■
Assignable Pedal Functions
For functions indicated with “*”, use only the foot controller; proper operation cannot be done with a
footswitch.
Footswitch/Foot Controller Settings
ARTICULATION 1/2
(PSR-S910)
When you use a Super Articulation Voice that has an effect assigned to the
pedal/footswitch, you can enable the effect by pressing the pedal/footswitch.
You can turn this function on or off for each keyboard part on this display.
VOLUME*
Allows you to use a foot controller to control the volume. You can turn this
pedal function on or off for each part on this display.
2
3
5
4
