Yamaha PSR-I400, Руководство пользователя

Страница: 39 / 64

PSR-I400 Owner’s Manual
39
Re
fe
re
n
c
e
Arpeggio Settings
Synchronizing an Arpeggio to
Song/Style/Riyaz Playback—
Arpeggio Quantize
When you play the keyboard to trigger an Arpeggio
(page 20) along with Song/Style/Riyaz playback,
you’ll need to play the notes with correct timing to
keep the Arpeggio in synchronization with the other
playback tracks. However, your actual timing may be
slightly ahead of or behind the beat (or both). The
“Arpeggio Quantize” function of this instrument will
correct any slight imperfections in the timing (accord-
ing to settings below), and then play back the Arpeg-
gio appropriately.
• Synchronizing at the quarter notes
• Synchronizing at the 8th notes
• No synchronization with Style or Song playback
Although the Arpeggio Quantize value is pre-pro-
grammed for each Arpeggio Type, you can change the
value manually.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [+] and [-] buttons to
call up “Quantize” (Function 042).
After “Quantize” is shown for a few seconds, the
current Arpeggio Quantize value is shown.
3
Rotate the dial to select a value from
“OFF,” “1/8” and “1/16.”
• 1/8 Synchronizing at the quarter notes
• 1/16 Synchronizing at the 8th notes
• OFF No synchronization with Style or Song
playback
Holding the Arpeggio Playback
via the Footswitch
You can set the instrument so that Arpeggio playback
continues even after the note has been released, by
pressing the footswitch connected to the [SUSTAIN]
jack.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [+] and [-] buttons to
call up “Pdl Func” (Function 061).
After “Pdl Func” is shown for a few seconds, the
current setting is shown.
3
Rotate the dial to select “Arp Hold.”
If you want to restore the footswitch function to
sustain, select “Sustain.” If you want to use both
hold and sustain functions, select “Sus+ArpH”.
4
Try playin g Arpe gg io with the foot-
switch.
Press the notes to trigger the Arpeggio, then press
the footswitch. Even if you release the notes,
Arpeggio playback will continue. To stop Arpeg-
gio playback, release the footswitch.
Quantize
042
1/8
2
042
Current value
Pdl Func
061
Sustain
1
061
Current setting
Arp Hold
2
061