Yamaha PSR-I400, Руководство пользователя

Страница: 20 / 64

PSR-I400 Owner’s Manual
20
Qui
c
k Gui
d
e
Creating Arpeggios
The Arpe gg io function lets you create arpe gg ios (broken chords) by simply pressin g
the notes of the chord. For example, you could play the notes of a triad—the root, third,
and fifth—to tri
gg er interestin g phrases. This feature can be used for music production
as well as performance.
1
Press the [ARPEGGIO] button to turn on
the Arpe
gg io function.
2
Press a note or notes to tri gg er Arpe g -
g io.
The Arpeggio phrase differs depending on the
number of pressed notes and the area of the key-
board.
When Split is on, Arpeggio is applied only to the
Split Voice. When Split is off, Arpeggio is applied
to the Main and Dual Voices. Arpeggio cannot be
applied to the Split and Main/Dual Voices simulta-
neously.
3
To turn off the Arpe gg io, press the
[ARPEGGIO] button a g ain.
The most suitable Arpeggio Type is automatically
selected when you select a Main Voice, but you can
easily select any other Arpeggio Type.
1
Hold down the [ARPEGGIO] button for
lon
g er than a second.
In the display, “ARP Type” appears for a few sec-
onds, followed by the current Arpeggio Type
appears.
2
Rotate the dial to select the desired
Arpe
gg io type
For the Arpeggio List, refer to the Data List on the
website.
Triggering the Arpeggio
• Selecting a Voice number between 253 and 298 will turn
on Arpeggio automatically.
• When you select one of the Main Voices 283–292, Split
as well as Arpeggio is automatically turned on. This
allows you to immediately trigger an Arpeggio by press-
ing a key to the left of the Split Point after selecting one
of these Voices.
• When the Pedal Function is set to “Arp Hold” or
“Sus+ArpH” (page 50), pressing the footswitch con-
nected to the [SUSTAIN] jack will cause Arpeggio play-
back continue even after the note is released.
Shehnai
004
NOTE
NOTE
Changing the Arpeggio Type
• When any of Voices 253–298 are selected, it is a good
idea to set the Pedal Function to “Arp Hold” or
“Sus+ArpH” (page 50). This setting allows you to use a
footswitch (press and hold) to have Arpeggio playback
continue even after the note is released.
DownOct
002
Hold for longer
than a second.
The currently selected arpeggio
type
NOTE