PSR-I300 Owner’s Manual
50
Re
fe
re
n
c
e
Playing a Device with the Built-in Speakers
You can output the sound of an audio device, such as a smartphone, with the built-in
speakers of this instrument by connectin
g
it via a cable. This lets you play the keyboard
alon
g
with playback of your music player.
1
Turn off the power for both the external
audio device and this instrument.
2
Connect the audio device to the instru-
ment’s [AUX IN] jack.
Use a cable having a stereo-mini plug on one end
for connecting to this instrument and a plug
matching the output jack of the external audio
device on the other end.
3
Turn on the external audio device, and
then this instrument.
4
Play back the connected external audio
device.
The sound of the audio device is output through
the speakers of this instrument.
5
Adjust the volume balance between the
external audio device and this instrument.
Adjust the audio playback volume on the audio
device, and then adjust the entire volume by
rotating the [MASTER VOLUME] control of the
instrument.
6
Play the keyboard alon
g
with the sound
of the audio device.
You can cancel or lower the volume of the melody
part of audio playback. For details, refer to page
51.
7
After finishin
g
your performance or prac-
tice, stop playback of the audio device.
• Before connecting, turn off the power of both this instrument and the external audio device. Also, before turning the power on or
off, make sure to set all volume levels to minimum (0). Otherwise, damage to the devices, electrical shock, or even permanent
hearing loss may occur.
CAUTION
• To avoid damage to the external audio device and this
instrument, first turn on the power to the external device,
and then to the instrument. When turning off the power,
first turn off the power to the instrument, and then to the
external device.
• If you are using a computer or a smart device such as an
iPhone/iPad, you can also connect it to the [USB TO
HOST] terminal (see “Connecting to a Computer” on
page 52).
NOTICE
Audio device
(smartphone, etc.)
Stereo-mini
plug
NOTE
• You can adjust the level of the input from the external
audio device by calling up “AuxInVol” via Function num-
ber 042 (page 56) and using the [0]–[9], [+/YES], [-/NO]
buttons.
NOTE
Содержание PSR-I300
