Yamaha PSR-EW400, Руководство пользователя

Страница: 48 / 80

Parameters Assigned to the Knobs
PSR-E453/PSR-EW400 Owner’s Manual
48
Re
fe
re
n
c
e
Adding DSP Effects
DSP is term of abbreviated form of Digital Signal Pro-
cessor. DSP effects are applied only to a specified
part as described below.
Parts to which DSP effects are applied
1
Press the [DSP] button to turn DSP on.
Although turning on DSP will select a DSP type
suitable for the current panel setting, you can
select a different DSP type as described in the
following steps.
2
Hold down the [DSP] button for longer
than a second to call up “DSP Type”
(Function 040).
After a few seconds, the current DSP type
appears.
3
Rotate the dial to select a DSP type.
For information about the available DSP types,
refer to the Effect Type List in the Data List.
4
Press the CATEGORY [+] button once to
call up “DSP Part” (Function 041).
After a few seconds, the current part to which the
DSP effects are applied appears.
5
Rotate the dial to select a part to which
the DSP effects are applied.
Refer to the chart of “Parts to which DSP effects
are applied” (see left), and select “Keyboard” or
“Style.”
6
Press the [ASSIGN] button several times
to assign Function 6 to the knobs (page
25).
7
Turn the knobs while playing the part
selected in step 5 to see how the DSP
effects change.
8
Press the [DSP] button again to turn
DSP off.
DSP part: Keyboard
• Main Voice
• Dual Voice
• Track 1 of a User Song

When selecting the “ Keyboard ” part for DSP
DSP
• ON/OFF
• Type
DSP part: Style
• Style
• Pattern
• Track A of a User Song

When selecting the “ Style ” part for DSP
Output
Output
Output
Output
DSP part: Keyboard
• Main Voice
• Dual Voice
• Track 1 of a User Song
DSP
• ON/OFF
• Type
DSP part: Style
• Style
• Pattern
• Track A of a User Song
This parameter is set in step 5.
Appears when
the DSP is on.
DSP Type
040
RotarySp
01
040
Current DSP type
Hold for longer
than a second.
Limitations when recording a Song
• DSP effects can be recorded only to Tracks 1
and A.
• The DSP type and part cannot be changed
while recording.
• When recording to an existing User Song, if the
part to which the DSP effects are applied differs
from the recording tracks, DSP related setting
data (DSP part, type, parameter A/B) will not
be recorded or overwritten.
• The DSP effects may not be applied as
expected when a User Song is being played
back. This is because the DSP effects are
affected by the data recorded to the User Song.
DSP Part
041
Keyboard
041
1
Current Part