Yamaha PSR-EE433, Руководство пользователя

Страница: 32 / 61

PSR-E433/PSR-I455
32
•
Other Tests
Popping Noise Check
Connect the oscilloscope to the L/R of the [PHONES/OUTPUT] jack and turn on and then off the [STANDBY/ON] switch. Make
sure that popping noise level is 1.0 Vp-p or less, and that no abnormal sound or popping noise is output from the speakers.
Noise Level Check
Connect the level meter (with JIS-C fi lter) to the L/R of the [PHONES/OUTPUT] jack. (33 Ω load)
Set the [MASTER VOLUME] to the maximum level and check the noise level.
· PHONES L, R: –72 dBu or less
TEST No LCD display Test descriptions, judging conditions, etc.
54 Rom Chk2
054 Checks the ROM connected to the CPU bus.
Make sure that “
Rom OK
” is displayed on the LCD.
It will take about 25 seconds for the check.
55 Ram Chk2
055 Checks the RAM connected to the CPU bus.
Make sure that “
Ram OK ” is displayed on the LCD.
56 FRomChk2
056 Checks the FROM connected to the CPU bus.
Make sure that “
FRom OK ” is displayed on the LCD.
It will take about 100 seconds for the check.
59 Factory
059 Initializes the entire backup area to reset to the factory default.
“
Fact ” is displayed on the LCD during the test.
“ Fact End ” is displayed on the LCD when the test is fi nished.
60 TestExit
060 This will leave the test program and change to the play mode.
Switch test item list (PSR-E433, PSR-I455)
Turn
PSR-E433 PSR-I455
Note Number
SW Name LCD Display SW Name LCD Display
1 DIAL UP Dial Up DIAL UP Dial Up C2
2 DIAL DOWN Dial Dwn DIAL DOWN Dial Dwn C#2
3 DEMO Demo DEMO Demo D2
4 LESSON Lesson LESSON Lesson D#2
5 SONG REC Song REC SONG REC Song REC E2
6 METRONOME Metro METRONOME Metro F2
7 TAP TAP TAP TAP F#2
8 TEMPO – Tempo – TEMPO – Tempo – G2
9 TEMPO + Tempo + TEMPO + Tempo + G#2
10 PORTABLE GRAND Piano PORTABLE GRAND Piano A2
11 SPLIT Split SPLIT Split A#2
12 DUAL Dual DUAL Dual B2
13 HARMONY Harmony HARMONY Harmony C3