Yamaha PSR-E433, Руководство пользователя

Страница: 28 / 68

PSR-E433 Owner’s Manual
28
Quick Guide
Recording Your Performance
You can record up to 10 of your performances as User Songs. The recorded User
Songs can be played back on the instrument.

Melody Tracks [1]–[5]
The melody performance in the right-hand area of
the keyboard will be recorded.

Accompaniment Track [A]
The chord progression (for the Style) or the key
change (for the Pattern) will be recorded.
The operation is useful when you record a new Song
from scratch.
1
Make the desired settings including the
Main Voice selection.
2
Make the desired settings of your perfor-
mance.
• If you want to record only the melody performance, press
the [SONG] button.
• If you want to record the performance using a Style, press
the [Style] button.
• If you want to record the performance using a Pattern,
press the [Pattern] button.
3
Press the [REC] button to enter the
Record Ready mode.
If a User Song was not selected beforehand, this
operation selects the lowest-numbered unrecorded
User Song (from 101–110) as Recording target.
To exit from this status, press the [REC] button
again.
4
Start recording.
• When you press the [SONG] button in Step 2, play any note
to start recording.
• When you select a Style in Step 2, play a chord in the Auto
Accompaniment area to start recording with Style play-
back, or press the [START/STOP] button to start recording
only with playback of the Rhythm part of a Style.
• When you select a Pattern in Step 2, play a key in the
Accompaniment area or press the [START/STOP] button to
start recording with Pattern playback.
The current measure will be shown on the display
while recording.
5
Press the [START/STOP] or [REC] button
to stop recording.
When using a Style, you can stop recording also
by pressing the [ENDING] button then waiting
until playback ends.
After recording finishes, “Writing!” appears indi-
cating that the recorded data will be stored, then
the recorded track numbers in the display will
light.
6
To play back the recorded Song, press
the [START/STOP] button.
Track Structure of a Song
Quick Recording
• The ACMP on/off status cannot be changed after the
[REC] button is pressed.
Track
1
Track
2
Track
3
Track
4
Track
5
Accompaniment
Track
User 1
rEC
001
Flashes
Flashes
NOTE
• Never attempt to turn the power off when “Writing!” is
shown in the display. Doing so can damage the flash
memory and result in a loss of data.
User 1
rEC
003
Current measure number
or
NOTICE