MIDI Functions
74
4
Press the [START/STOP] button.
Start the Initial Setup Send operation.
5
Start recording on the sequencer, then send the Initial
Setup data.
Start recording on the sequencer in the normal way, then — with as little
delay as possible — press the [+] button to actually start transmitting the
data.
An “End” message briefly appears in the display when the operation is com-
plete.
6
Stop recording on the sequencer.
Stop recording on the sequencer in the normal way. Make sure that any sub-
sequently recorded performance data is recorded at least one measure fol-
lowing the Initial Setup data.
Local Control
This function lets you enable or disable keyboard control over the PSR-GX76’s
voices. This would come in handy, for example, when recording notes to MIDI
sequencer. If you are using the sequencer to play back the voices of the PSR-
GX76, you would want to set this to “off” — in order to avoid getting “double”
notes, both from the keyboard and from the sequencer. Normally, when playing
the PSR-GX76 by itself, this should be set to “on.”
1
Select the local control on.
While holding the lowest F key and turnning on the power.
End
• When the Initial Setup Send
operation is completed, the PSR-
GX76 automatically returns to
the previous panel condition.
• Select the local control off. Sim-
ply turning on the power again.
Содержание PortaTone PSR-GX76
Страница 1: ......
Страница 91: ...COVER 3 ...