135
,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,
QQQQQQQQQQQQQQQQQQ
QQQQQQQQQQQQQQQQQQ
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
●
MESSAGE SWITCH
The
SYS/EX. TRANSMIT
parameter turns MIDI trans-
mission of MIDI exclusive data ON or OFF. The
SYS/EX.
RECEIVE
parameter turns MIDI reception of MIDI exclusive
data generated by external equipment ON or OFF.
The
CHORD SYS/EX. TRANSMIT
parameter turns MIDI
transmission of MIDI chord exclusive data (chord detect — root
and type) ON or OFF. The
CHORD SYS/EX. RECEIVE
parameter turns MIDI reception of MIDI chord exclusive data
generated by external equipment ON or OFF.
■
TRANSMIT
...........................................................................................................................................................................................
This display page allows you to specify which PSR-8000 voices
and parts will be transmitted via which MIDI channels (there
are 16 MIDI channels), and to specify which types of data will
be transmitted for each channel.
●
TRANSMIT MONITOR
The Tx MONITOR (transmit monitor) at the top of the
display indicates when data is being transmitted on any of the
16 MIDI channels: The dots corresponding to each channel (1
… 16) flash briefly whenever any data is transmitted on the
channel(s).
The PSR-8000 “Functions”
●
CHANNEL
Use either the
▲
and
▼
LCD buttons to the
left of the display, or the
CH
LCD dial to select
the channel to which you want to assign a part
or change a data switch setting. The channel
numbers are shown in the leftmost column in
the display.
●
PART
The PART LCD dials select the voice or part
which will be transmitted via the currently
selected channel. Only one voice or part can be
specified per channel. Any of the parts listed to
the right can be selected. If one part is assigned
to multiple channels, only the lowest-num-
bered channel will be used.
OFF
No data will be transmitted on the
selected channel.
LEAD
Only data corresponding to the specified
voice will be transmitted on the selected
channel.
* UPPER: above the “A” split point
* LOWER: below the “A” split point
MULTI PAD 1
Multi pad phrases from the corresponding
pad are transmitted via the selected
channel.
ACMP RHYTHM 1
The specified accompaniment part is
transmitted via the selected channel.
SONG 1 … SONG 16
The specified SONG track is transmitted
via the selected channel.
RIGHT 1
RIGHT 2
LEFT
UPPER
LOWER
MULTI PAD 2
MULTI PAD 3
MULTI PAD 4
ACMP RHYTHM 2
ACMP BASS
ACMP CHORD 1
ACMP CHORD 2
ACMP PAD
ACMP PHRASE1
ACMP PHRASE2
Содержание PortaTone PSR-8000
Страница 1: ......
Страница 206: ...M D G EMI Division 1997 Yamaha Corporation VZ20220 801POCP4 3 03C0 Printed in Japan ...