Yamaha Portatone PSR-5700, Руководство пользователя

Страница: 38 / 56

3 7
LEFT HOLD will not function during Multi Pad playback or Sequencer
ACCOMP. track playback even if the LEFT HOLD indicator is lit.
The PITCH BEND/GLISSANDO wheel to the left of the keyboard lets
you bend the pitch of notes or “glissando” notes played on the keyboard up
or down. Normal pitch is restored when the PITCH BEND/GLISSANDO
wheel is released. The maximum pitch bend/glissando range is preset for
each voice, but can be set as required for custom voices by using the CUS-
TOM VOICE EDIT feature described on page 27 of the Advanced Features
manual.
Pitch bend can be applied o the ORCH. 1 voice only, the ORCH. 2 voice only,
or both voices via the PITCH BEND ASSIGN function described on page 39 of
the Advanced Features manual. Also, pitch bend is applied to harmony notes
on the basis of the ORCH. 1 settings.
The pitch bend wheel may have no effect when applied to notes at the upper
and lower extremes of the keyboard if a CUSTOM VOICE is used. Also, sudden
pitch changes may occur.
Pitch bend can be applied to notes from C-1 to C7 (i.e. MIDI note numbers 12
through 108). Pitch can not be bent down below the lowest note or up above the
highest note in this range.
The MODULATION/EFFECT wheel to the left of the keyboard lets you
apply effects or amplitude/pitch modulation to notes played on the key-
board. Rolling the MODULATION/EFFECT wheel upward (away from
you) increases the effect or modulation depth. Use the WHEEL SELECT
function described on page 39 of the Advanced Features manual to select
effect or modulation operation. The type of effect applied when effect op-
eration is selected is determined by the EFFECT TYPE function described
on page 36 of the Advanced Features manual.
The modulation effect mode is preset for each voice, but can be set for
custom voices by using the CUSTOM VOICE EDIT feature described on
page 27 of the Advanced Features manual.
Modulation is automatically applied to some voices, while to some it cannot be
applied even if the modulation wheel is operated.
Press the [REVERB] button to apply the reverb effect specified by the
REVERB TYPE function described on page 35 of the Advanced features
manual to the ORCH. 1 and 2 voices as well as the chord and rhythm ac-
companiment sound. The [REVERB] button alternately turns the reverb
effect on (indicator lit) or off (indicator out).
Press the EFFECT button to apply the effect specified by the EFFECT
TYPE function described on page 36 of the Advanced features manual to
the ORCH. 1 and 2 voices as well as the chord accompaniment sound. The
[EFFECT] button alternately turns the effect on (indicator lit) or off (indica-
tor out).
DETAIL
HINT
DETAIL
DETAIL
■
Pitch Bend/Glissando
Wheel
DOWN
UP
PITCH BEND/
GLISSANDO
MAX
MIN
MODULATION/
EFFECT
■
Modulation/Effect Wheel
DOWN
UP
PITCH BEND/
GLISSANDO
MAX
MIN
MODULATION/
EFFECT
DETAIL
■
Reverb
REVERB
EFFECT
■
Effects
REVERB
EFFECT