19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
■
Transpose
The PSR-410 [TRANSPOSE] button makes it possible to shift the pitch of the PSR-410 up or down in semi-
tone intervals up to a maximum of 12 semitones (one octave). Transposing the pitch of the PSR-410 keyboard
makes it easier to play in difficult key signatures, and you can easily match the pitch of the keyboard to the
range of a singer or other instrumentalist.
Z
Press the [TRANSPOSE] Button ...........................................................................................................
Press the OVERALL CONTROL section [TRANSPOSE] button. The cur-
rent transpose value will appear on the MULTI DISPLAY.
X
Set the Desired Degree of Transposition .............................................................................................
Use the [
+
] and [
−
] buttons, the number buttons, or the [TRANSPOSE]
button itself to set the desired degree of transposition.
The transposition range is from
−
12 to
+
12, with
−
12 corresponding to
downward transposition by 12 semitones (one octave), and
+
12 corresponding
to upward transposition by 12 semitones. 00 is the “normal” keyboard pitch
value. The normal transpose value (00) can be recalled instantly by pressing
both the [
+
] and [
−
] buttons at the same time.
NOTES
• The new transpose value will apply from the next note played — i.e. you
can’t transpose the sound of a note while it is playing.
0
2
1
RESET
–
+
■
Touch Response
This function turns the touch response of the keyboard on or off.
Use the [TOUCH RESPONSE] button to turn touch response ON or OFF
as required. When OFF (i.e. when the indicator is off) the same volume is pro-
duced no matter how hard you play on the keyboard. Touch response can be
turned OFF to produce a more realistic effect with voices that normally do not
have touch response: e.g. organ and harpsichord.
TOUCH
RESPONSE
■
Tuning
The PSR-410 [TUNING] button makes it possible to tune the pitch of the PSR-410 to match other instru-
ments. Tuning can be accomplished over a
±
50-cent range (that’s 100 cents total, or one semitone) in 33 steps.
Z
Press the [TUNING] Button ....................................................................................................................
Press the OVERALL CONTROL section [TUNING] button. The current
tuning value will appear on the MULTI DISPLAY.
X
Set the Tuning ........................................................................................................................................
Use the [
+
] and [
−
] buttons, the number buttons, or the [TUNING] button
itself to set the desired tuning value.
The tuning range is from
−
16 (
−
50 cents) to
+
16 (
+
50 cents). “00” (
±
0
cents) is the “normal” tuning value. The normal tuning value (00) can be re-
called instantly by pressing both the [
+
] and [
−
] buttons at the same time.
NOTES
• The tuning setting is retained in memory even when the power switch is
turned off, as long as batteries are installed or an AC adaptor is con-
nected.
0
2
1
RESET
–
+
TRANS-
POSE
TUNING
Содержание Portatone PSR-410
Страница 1: ......
