manualshive.com logo in svg

Yamaha PM5D, Руководство пользователя

Поделиться
Скачать
Yamaha PM5D Скачать руководство пользователя страница 314

INPUT VIEW function

314

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual    

Reference section

This screen shows the on/off status, level, and cue monitor 
status of the input channels and DCA groups.

Except for the fact that this screen is for input channels, 
DCA groups, and STEREO A/B channels, this is the same 
as the OUTPUT VIEW function FADER VIEW screen. 
Refer to p.273.

In this screen you can copy the desired parameter(s) from 
the selected input channel into a memory buffer, and paste 
or move them to the same type of channel (you may select 
more than one paste-destination).

A

JOB SELECT

Here you can select either Copy or Move as the 
operation.

• COPY

The copy-source channel will remain; its parameters 
will be copied to another channel.

• MOVE

The parameters will be moved to another channel.

Note

When you execute the channel move operation, the channels 
between the selected channel and the move-destination chan-
nel will also move forward or backward.

FADER VIEW screen

FADER VIEW

CH JOB screen

CH JOB

CH JOB

1

Содержание PM5D


























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды