31/34
PM5D & DME24N with MY16-C/MY16-CII / Remote Control & Bi-directional Audio (Using MY16-C/MY16-CII)
■
Scene Recall MIDI Link
The SCENE RECALL LINK switch in
the DME CONTROL-SETUP screen
will enable PM5D to send a MIDI
message through the CobraNet
connection to recall a scene in the
DME, following the Program Change
table assignments.
You need to switch on PROGRAM
CHANGE Tx. (It doesn’t matter about
the MIDI PORT selection, as it will use
the MY16-C/MY16-CII port
automatically.)
You need to switch on Program Change Rx. (It doesn’t
matter about the MIDI PORT selection, as it will use the
MY16-C/MY16-CII port automatically.)
PM5D has a default Program Change assignment of 1-to-1,
but DME’s Program Change table will need to be set up by
the user: assign any scene to any number. (Click ‘All Assign’
for a quick set-up.)
