background image

3

The sounds

When you boot up your Motif, one of the

queries it does is to the PLG slots, “Now

checking Plug-in boards…”. If it finds a
PLG150-PF board in one of the slots it will

load from ROM a bank of 64 Voices that

will address the PLG150-PF. This bank is
referred to as the PLG PRE1 bank (PLUG-IN

PRESET1). The Presets will find the

PLG150-PF board. The bank will always be
PLG PRE1 no matter which slot you place

the board.

In the main Voice screen above, the P1-P

prefix denotes that the PF board is in

PLUG-IN SLOT 1 (P1)

2

 and this is a Preset

bank (P). These are 64 sounds are
programmed integrating them with Motif

parameters, controllers and effects. They

are made with great care to play well and
give you a remarkable set of piano

category sounds. In addition to the PLG

PRE1 bank of 64 Motif provides a PLG USR
bank with 64 blank locations for you to

create your own variations. These remain a

part of the Motif memory after power

down. They are made from the 128 Board
Voices (raw data) provided on the PLG150-

PF board.

The PLG150-PF sounds are divided into two

categories: Finished “PLUG-IN” VOICES

(like the PLG PRE1 and the PLG USR Voices
you will make). These sounds are Motif

level Voices – meaning they are sounds

that have the source waveforms on the

PLG150-PF but they have been integrated
with Motif parameters, controllers, and

effects. This is opposed to the “BOARD”

Voices bank 032/000, which are like the
“raw material” that you use to build

finished Motif Plug-in Voices. 

                                                          

2

 

If your PLG150-PF is in slot 2 your screen will

read P2-P, slot 3 will read P3-P.

To select banks

: From the main Voice

screen press the F2 BANK button, then use

the wheel or the INC/YES, DEC/NO buttons

to change to the various banks. When

ready to try the Voices in that bank Press
F1 PLAY. There are three banks you should

concern yourself with when you have the

PLG150-PF board in a Modular Synthesis
Plug-in System host (like the Motif). They

are the PLG PRE1, PLG’1’USR*, and

032/000. 

* number refers to slot

The aforementioned 128 “BOARD” Voices

will be found in a bank called 032/000. 

 

Press F2 Bank from the main Voice

Screen and select the 032/000 bank

Board Voices have yet to be integrated

with Motif parameters, controllers or
effects. It may be a bit much to call them

“raw” data because they are already

tweaked to a “ready-to-play” state – but
they do not have Motif Effects applied yet.

There are 128 sounds resident here. Select

bank 032/000 then press F1 PLAY.
Obviously, 64 of these have already been

programmed for the PLG PRE 1 bank. But

there are 64 more sounds waiting for you

to tweak and store as PLG USR sounds. 

Listed below are the 128 Voices.

Содержание PLG150-PF









Отзывы: