Yamaha PLG150-DX Скачать руководство пользователя страница 69

Страница: 69 / 76

Setup Menus /

Insert DX Bulk Dump Data

• The following information pertains only to the Plug-in Editor.

This is used for inserting the edited DX voice data to a song track in host application.

(This is affected also by the

DX Simulator Setup

settings.) By inserting appropriate data

at appropriate points in a song, you can have the DX voice change automatically as

needed.

• “Insert DX Bulk Dump Data” can also be selected from the

toolbar

• Track

This determines the track to which the DX voice data will be inserted.

• Only tracks that have been set to the “MIDI” type can be selected here.

• Measure / Beat / Clock

This determines the precise location in the track to which the DX voice data will be
inserted. You can specify the Measure (Meas), Beat, and Clock. Make sure to enter this
at the beginning of a song, before any note data.

• OK

Click this to insert the selected DX voice data to the specified location.

• Cancel

Click this to abort the operation.

Insert DX Bulk Dump Data

Содержание PLG150-DX













































































Результаты поиска

Содержание PLG150-DX

Отзывы:

Похожие инструкции для PLG150-DX

Бренды по названию

Популярные бренды

Yamaha PLG150-DX, Руководство пользователя

Результаты поиска

Содержание PLG150-DX

Отзывы:

Похожие инструкции для PLG150-DX

Бренды по названию

Популярные бренды