DVD-E810
10
■
TEST MODE
• Starting Test Mode
a. Connect the power cable to the AC outlet.
b. Press the “STANDBY/ON” key while simultaneously pressing “NEXT/F.FWD” and “STOP” keys of the main unit.
At this time, keep pressing “NEXT/F.FWD” and “STOP” keys for 8 seconds or longer.
c. The “FV xx” (firmware version) is displayed.
* The firmware version and region code appears on the TV monitor screen at this time.
• Display Test
The display condition varies as shown below according to the “PLAY” key of the main unit.
• Panel Key Test
The display changes as shown below as the specified key is pressed.
* When performing the panel key test, a remote controller for RX-E810 is required.
Initial display
Initial display
All segments on
Lighting of segments in lattice
(OFF)
(OFF)
(ON)
• Canceling Test Mode
Disconnect the power cable from the AC outlet.
Press “OPEN/CLOSE” key of the main unit.
Press “STANDBY/ON” key of the main unit.
Press “OPEN/CLOSE” key of the main unit.
Press “STOP” key of the main unit.
Press “PLAY/PAUSE” key of the main unit.
Press “PREV/F.REV” key of the main unit.
Press “NEXT/F.FWD” key of the main unit.
Press any key of the remote controller.
* Be sure to use a remote controller for RX-E810.
Содержание PianoCraft DVD-E810
Страница 23: ...DVD E810 23 MEMO MEMO MEMO MEMO ...
Страница 34: ...DVD E810 ...