Yamaha P-60, Руководство по обслуживанию

Страница: 7 / 42

7
P-60/P-60S
■
DISASSEMBLY PROCEDURE
* If you remove filament tapes for disassembling, be sure to apply them on the same condition as before at the time
of reassembling.
[180]
[170] [170] [180] [180] [180]
1. Upper Case Assembly (Time required: about
4 min)
1-1 Lay the unit upside down and remove the two (2)
screws marked [170] and the seventeen (17) screws
marked [180]. (Fig.1)
1-2 Lay the unit right side up and open the upper case
assembly. (Fig.2)
1-3 Remove the screw marked [150a]. The upper case
assembly can then be removed. (Fig.3)
* When reinstalling the upper case assembly, identify
the fixing point by fitting the three dowels into
holes on the keybed. (Fig.4)
[330d]
[160a] [160b] [160b] [330a] [150c] [330b]
[150a]
[150b]
[140]
PN
[330c]
AM D-JACK
DM
[190] [190]
Shield Cover
Hole
Dowel
[170]: Truss Head Screw 4.0X16 MFZN2BL (V6207400)
[180]: Truss Head Tapping Screw-B 4X25 MFZN2BL (VV685800)
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4)
[140]: Bind Head Tapping Screw-B 3.0X8 MFZN2BL (EP600190)
[150]: Bind Head Tapping Screw-1 3.5X12 MFZN2Y (EP030240)
[160]: Bind Head Tapping Screw-1 4.0X14 MFZN2Y (EP040230)
[190]: Pan Head Screw 5.0X25 MFZN2YPW (VV040700)
[330]: Bind Head Tapping Screw-B 3.0X8 MFZN2Y (EP600250)