25
Once you have modified certain
parameters in Voice Play or
Performance Play mode,
$
(Quick
Edit) will display in the upper right
corner to remind you that you have
modified the original settings.
Parameters include the following:
reverb and modulation setting,
stereo/mono setting for Piano1 and
Piano2, electric/upright setting for
Bass, plus Balance, Dual Detune, Split,
and Transpose settings.
■
Stereo/Mono Piano
Pressing and holding the [PIANO 1] (or [PIANO 2]) button for a few moments
alternately selects the stereo and mono settings.
The initial default setting for the PIANO 1 (and PIANO 2) voice is stereo, and
polyphony is 32 notes.
CHANGING THE PIANO VOICE SETTING
Press and hold [PIANO 1] (or [PIANO 2]) for a few moments.
After a moment, the MONO screen briefly appears.
As you play the keyboard, the output of the PIANO 1 voice will be in mono, and
polyphony will be 64 notes.
To return the PIANO 1 voice to its stereo setting, simply press and hold [PIANO 1] for
a few moments again. The STEREO screen briefly appears.
■
Upright/Electric Bass
Pressing and holding the [BASS] button for a few moments alternately selects the
Upright and Electric settings.
The initial default setting for the BASS voice is Upright Bass.
CHANGING THE BASS VOICE SETTING
Press and hold [BASS] for a few moments.
After a moment, the ELECTRIC BASS screen briefly appears.
Piano1 32/64
$
mono
Piano1 32/64
$
stereo
Upright/Elec.
$
Elec.Bass
or
MIDI FILTER
PIANO 2
SYSTEM
PIANO 1
1
2
INT.EQ
BASS
12
NOTE
P200̲03.QX 98.4.21 10:35 PM ページ 25