2
En
En
3
p
(power)/indicator (LED)
When you press
p
(power), the speakers will turn on and the indicator
will light up. Also, the auto-standby mode will be available.
Even when the speakers are turned off or are in standby mode, they consume a
small amount of electricity.
This unit has a function that automatically activates standby mode
(power save mode) when this unit is turned on and no audio signal is
input or when the connected device is playing at a low volume for a
certain amount of time (about 30 minutes).
In standby mode, the indicator light goes off.
When a connected device is played while the speakers are in standby
mode, the speakers activate automatically and sound is output.
When
p
(power) is pressed again, the speakers turn off.
•
The time before entering standby mode is only a guide. It varies depending on
the usage environment.
•
If the sound from a connected device is too low, the speakers may not activate. In
this case, turn up the volume of the connected device.
•
If you are using devices, such as mobile phones, which emit electromagnetic
waves near the speakers, the speakers may activate by themselves, or not enter
standby mode.
4
AUDIO INPUT 1/2 (input connectors)
Connects with external devices, such as portable players, using the
supplied 3.5 mm stereo mini plug cable.
5
TO LEFT SPEAKER
Connects with a cable from the
L
speaker (left) through this connector.
6
12V
(DC 12V)
Make sure you use the supplied AC adaptor.
Auto-standby
Note
OFF
ON
Viewing the
p
(power)
button from the side…
Status indicator (LED)
z
No light
{
Light
Sound signal
p
(power) off
p
(power) on
Present
z
{
Not present
z
{
→
z
After about
30 minutes
Notes
Perform the following procedure to exit standby mode.
a
Turn up the output level of the connected device.
b
Rotate the
VOL
(volume) control of this unit and adjust to the desired sound
level.
f
e
d
R speaker (right)
L speaker (left)
Rear panel
