Yamaha NS-WSW160, Руководство пользователя

Страница: 26 / 98

Initial settings
26
En
S
/
T
SETUP
RETURN
ENTER
X
AUTO SETUP via setup menu
1
Place the IntelliBeam microphone at your
normal listening position, and press the
SETUP key.
See “Installing the IntelliBeam microphone” (
☞
p. 23) for
instructions on positioning the IntelliBeam microphone.
2
Press the
S
/
T
key to select “BEAM” and
then press the
X
key.
1)
3
Press the
S
/
T
key to select “IntelliBeam”
and then press the
X
key.
1)
4
Press the
S
/
T
key to select one of the
items below and then press the
X
key.
1)
Select Item:
“BEAM+SOUND OPTIMIZE”
(Beam optimization and sound optimization)
Select this optimization feature if you make settings for the
first time. This menu takes about 3 minutes.
“BEAM OPTIMIZE ONLY”
(Beam optimization only)
Use to optimize the beam angle so that the parameter best
matches your listening environment. This menu takes about
1 minute.
“SOUND OPTIMIZE ONLY”
(Sound optimization only)
Use to optimize the beam delay, volume, and quality so that
the parameters best match your listening environment. This
menu takes about 2 minutes.
You must optimize the beam angle with “BEAM
OPTIMIZE ONLY” before starting “SOUND OPTIMIZE
ONLY”. Select this optimization feature in the following
cases:
• If you have opened or closed the curtains in your
listening room before using this unit
• If you have manually set the beam angle.
5
Connect the IntelliBeam microphone to
this unit after “AUTO SETUP
(PREPARATION & CHECK)” screen is
displayed.
For the details on connecting IntelliBeam microphone,
refer to “Using AUTO SETUP (IntelliBeam)” (
☞
p. 24).
6
Follow steps 4, 5, and 6 under “Using
AUTO SETUP (IntelliBeam)” to configure
settings, and then remove the microphone.
The
ENTER
key performs the same function as the
X
key.
1)
y