Yamaha NS-WSW120 Скачать руководство пользователя страница 40

Страница: 40 / 83

PLAYBACK

➤

Enjoying sound based on your preference

This unit supports the following capabilities to enjoy sound based
on your preference.

• Surround playback mode

• CINEMA DSP

• Switching between audio output methods for surround playback

(p. 42)

• Stereo playback mode (p. 44)

• Target playback mode (p. 44)

• Enjoying surround sound with headphones (p. 44)

• Compressed Music Enhancer (p. 45)

• CLEAR VOICE (p. 45)

• Volume adjustment for each channel (p. 45)

Playback with surround sound

Surround sound is output as sound beams.

Press the SURROUND key to switch to surround
playback mode.

Yamaha’s exclusive CINEMA DSP technology reproduces sound
fields (sound amplitudes) for optimal surround sound playback.

Press the CINEMA DSP (MOVIE, MUSIC, or
ENTERTAINMENT) key repeatedly to select the
desired program.

The CINEMA DSP category name appears in the front
panel display and the CINEMA DSP indicator (p. 8) glows.

• The CINEMA DSP programs are not available in the following conditions.

– Audio signals with sampling frequency of higher than 48 kHz are being played

back.

– When using My Surround function (p. 43).

• This unit automatically memorizes the settings assigned to each input source.

When you select another input, the unit automatically recalls the last settings for
the selected input.

Enjoying sound based on your preference

Enjoying realistic surround sounds
(CINEMA DSP)

CINEMA DSP

SURROUND

Содержание NS-WSW120




















































































Результаты поиска

Содержание NS-WSW120

Отзывы:

Похожие инструкции для NS-WSW120

Бренды по названию

Популярные бренды

Yamaha NS-WSW120, Руководство пользователя

Результаты поиска

Содержание NS-WSW120

Отзывы:

Похожие инструкции для NS-WSW120

Бренды по названию

Популярные бренды