Yamaha NS-WSW120, Руководство пользователя

Страница: 42 / 83

PLAYBACK
➤
Enjoying sound based on your preference
En
42
To achieve optimal surround sound effects, you can switch
between sound beam output methods based on listening content
or room setup. See “Sound beam output options and
characteristics” (p. 43) to specify the optimal sound beam output
method.
1
Press the BEAM key to switch the sound beam
output method.
The following output methods can be selected from the sound
beam channel output settings (p. 55).
• The default sound beam channel output setting is “AUTO” (p. 55). At the default
setting, sounds are output from the appropriate number of channels according to
input signal as indicated below.
With 2-/5.1-channel input: 5.1-channel output
With 6.1-/7.1-channel input: 7.1-channel output
• The output method can be locked at 5.1 or 7.1-channel output.
• “SURROUND” is displayed when headphones are used. Switching between
sound beam output methods is not possible.
Switching between audio output methods
for surround playback
CHANNEL OUT Sound beam output method
5.1ch
5BEAM (5 Beam)
ST+3BEAM ( 3 Beam)
3BEAM (3 Beam)
MY SUR. (My Surround)
7.1ch
5BEAM+2 (5 Beam Plus 2)
ST+3BEAM+2 ( 3 Beam Plus 2)
3BEAM (3 Beam)
MY SUR. (My Surround)
BEAM