background image

E-

4

 Placing the subwoofer

It is recommended to place the subwoofer on the outside of
either the right or the left main speaker. (See fig. 

Å

 .) The

placement shown in fig. 

ı

 is also possible, however, if the

subwoofer system is placed directly facing the wall, the
bass effect may die because the sound from it and the
sound reflected by the wall may cancel out each other. To
prevent this from happening, face the subwoofer system at
an angle as shown in fig. 

Å

.

Note

There may be a case that you cannot obtain enough super-
bass sounds from the subwoofer when listening in the
center of the room. This is because “standing waves” have
been developed between two parallel walls and they cancel
the bass sounds.
In such a case, face the subwoofer obliquely to the wall. It
also may be necessary to break up the parallel surfaces by
placing bookshelves etc. along the walls.

Use the nonskid pads

Put the provided nonskid pads at the four corners on the
bottom of the subwoofer to prevent the subwoofer from
moving by vibrations etc.

 (         : Subwoofer,        : Main speaker)

ı

Å

You can place the speaker on top of the TV if the top is flat,
on the floor under the TV, or inside the TV rack . Be sure to
place the speaker in a stable position.
When placing the speaker on top of the TV, to prevent the
speaker from falling, attach the provided fasteners at two
points on the bottom of the speaker and on the top of the
TV.

Placing the center speaker

Notes

Do not place the speaker on top of a TV whose area
is smaller than the bottom of the speaker. If placed,
the speaker may fall and cause injury.

Do not place the speaker on top of a TV if the top is
inclined.

Do not touch the adhesive surface after peeling off
the seal as this will weaken its adhesive strength.

Thoroughly wipe clean the surface where the
fastener is to be applied. Note that adhesive strength
is weakened if the surface is dirty, oily or wet and
that this may cause the center speaker to fall.

Screen

Peel off
the seal

Fastener

NS-P230-236UB-Ea

02.5.8, 10:18 PM

4

Содержание NS-P236





















Отзывы: