E-
4
SPECIFICATIONS
Type ............................. 2-way bass reflex speaker system
Magnetic shielding type
Driver ............................................ 13 cm (5”) cone woofer
3 cm (1”) dome tweeter
Impedance ................................................................... 6
Ω
Frequency Response ................................ 60 Hz to 50 kHz
Nominal Input Power .................................................. 60 W
Maximum Input Power .............................................. 200 W
Sensitivity ................................................... 89 dB/2.83 V/m
Crossover Frequency ................................................. 3kHz
Dimensions (WxHxD) ......................... 180 x 333 x 184 mm
(7-1/16” x 13-1/8” x 7-1/4”)
Weight ........................................................ 5.0 kg (11 lbs.)
●
Specifications are subject to change without notice due
to product improvements.
●
Care should be taken not to exceed the input power
values noted above.
REMOVING THE FRONT COVER
The front cover is fastened to the enclosure at four points
and can be removed if desired. To remove the cover, hold
on to both sides and slowly pull straight away from the
speaker. To reattach, line up the four holes on the inner
surface of the cover with the four corresponding pegs on
the speaker and push gently.
Note
When the cover is removed, take care not to touch the
speaker units with your hands or to exert excessive
force with tools.
NS-M515 ENG(02.08.21)a
02.8.21, 8:40 PM
4
