E-
5
English
Connecting Your Speakers
Always turn off your amplifier or receiver before making any connections.
■
Preparing Your Speaker Cables
Carefully remove 10-15 mm of insulation from both ends of your speaker cables and twist the bare wires
tightly, as shown.
Good
No Good
10-15 mm
B
A
FRONT
CENT ER
R
L
SPEAKERS
REAR
(SURROUND)
REAR
CENT ER
CENT ER
R
L
R
L
L
R
Red (+)
Loosen
Tighten
Surround speakers
Center speaker
Note: The rear panel of
various amplifiers may
differ in appearance.
Black (-)
Red
Black
<4m>
<4m>
<10m>
<10m>
<4m>
<NS-LC5>
<NS-ELC5>
<NS-CLC5>
Front speakers
Notes:
• Make sure that the bare wires are not touching each other as this
could damage the speaker and amplifier.
• Connect one speaker to the left terminals of your amplifier, and
another speaker to the right terminals, making sure not to reverse
the polarity (+, –). If one speaker is connected with reversed
polarity, the sound will be unnatural and lack bass.
0523_NS-LC5_PC5_en.fm Page 5 Monday, May 23, 2005 6:54 PM