7
PAINTING THE SPEAKER FRAME AND GRILL
The speaker frame and grill can be painted to match your room décor. Use high quality spray paint and select a
well ventilated area before proceeding.
ADJUSTING THE HIGH LEVEL VOLUME CONTROL
If you wish to adjust the tonal balance to suit your
taste or your listening environment, use the High Level
control on the front panel to change the high
frequency volume level. Turn the control clockwise to
boost and counterclockwise to cut over a range of -6
dB to +3 dB.
SPECIFICATIONS
Speaker
6-1/2” Kevlar cone woofer
1-5/8” Aluminum dome mid range
1” Titanium dome tweeter
Frequency Range
50Hz to 28KHz
High level Frequency Control
+3dB to -6dB
Impedance
8
ohms
Nominal Input
50
W
Maximum Input
150
W
Sensitivity (dB/2.83v. 1m)
88
dB
Crossover Frequency
3,500Hz and 7,000Hz
Dimension (H x W x D)
11-15/16” x 8-29/32” x 3-13/16” (303.6 x 226.4 x 96.45 mm)
(Mounting depth)
3-1/16”
(77.7mm)
Weight
4.7 lbs (2.1 kg)
Magnetic Shielding
No
*Specifications subject to change without notice due to product improvements.
z
Painting the frame
1
Remove the speaker from the wall if it is already
installed. Also, remove the grill from the baffle.
2
Mask the speaker components and the baffle with
the supplied paint protective cover.
3
Apply the paint to the frame.
z
Painting the grill
1
Carefully remove the grill from the speaker, if
attached.
2
Apply the paint to the grill. Make sure that the grill
holes remain free of paint. Clogging the holes with
paint may diminish the sound quality.
Paint protective
cover
Speaker Grill
