Place the speaker on top of the TV or on the floor under the TV
or inside the TV rack in a stable position.
When placing the speaker on top of the TV, to prevent the
speaker from falling down, put the provided slip-prevention pads
at two points on the bottom of the speaker where the speaker
touches the surface of the TV.
SPECIFICATIONS
Type .......................2-way 3-speaker bass-reflex speaker system
Magnetic-shielding type
Speaker Unit................................................8 cm cone woofer x 2
2.2 cm semi-dome tweeter
Nominal Impedance ...........................................................6 ohms
Frequency Response ............................................65 Hz – 20 kHz
Nominal Input Power ..............................................................40W
Maximum Input Power .........................................................120W
Sensitivity.....................................................................89 dB/W·m
Dimensions (WxHxD)....................................435 x 100 x 230 mm
(17-1/8” x 4” x 9-1/16”)
Weight .............................................................2.0 kg (4 lbs. 6 oz.)
Accessories ..............................................Speaker cable (4m) x 1
Slip-prevention pad x 2
* Specifications subject to change without notice due to product
improvements.
* Care should be taken not to exceed the input power values
noted above.
PLACING THE SPEAKER
Printed in China V 228310
1
2
Speaker on TV
TV set
Speaker inside
TV rack
Slip-prevention
pad
Notes
• Do not place the speaker on top of the TV whose area is
smaller than the bottom area of the speaker. If placed,
the speaker may drop, causing a personal injury.
• Though this speaker is a magnetic shielding type, there
may be some influence on a TV picture depending on the
type of TV or the placement of the speaker. In such a
case, place the speaker apart from the TV so that there is
no influence on TV picture.
